Vector Arrow Generator
Generates high-fidelity 2D arrow outlines and meshes from input lines with custom mode logic.
Overview
Generates high-fidelity 2D arrow outlines and meshes from input lines with custom mode logic.
Inputs (5)
- Lines (Line): Input lines
- Mode (Integer): 0=End, 1=Start, 2=Double
- BodyWidth (Number): Body Width
- HeadWidth (Number): Head Width
- HeadLength (Number): Head Length
Outputs (2)
- Arrow2D (Curve): Arrow 2D Outlines
- ArrowMesh (Mesh): Arrow Meshes
Method, assumptions and simplifications
The same notes appear in the component's Info output.
Method
- For each line, a rectangular shaft of BodyWidth and a triangular head of HeadWidth × HeadLength are drawn in the plan perpendicular of the line (XY), at the end (Mode 0), the start (1) or both (2). The shaft is shortened by 0.9 × HeadLength under each head so they overlap slightly.
- Shaft and heads are unioned into one outline (Arrow2D) and meshed as a planar boundary (ArrowMesh). Lines shorter than 1.1 × HeadLength (2.2 × HeadLength in Double mode) are skipped and counted in a remark.
Assumptions
- Lines are horizontal or nearly so; widths and lengths are in model units.
Simplifications and limits
- Vertical lines give a degenerate outline; any Mode other than 0 to 2 draws the shaft without heads.
Workflow
- Movement or wind direction lines -> Lines; ArrowMesh -> Custom Preview for diagrams.