Terrain Generator Pro
Generates topography with noise-masked procedural forest scattering and strict elevation limits.
Overview
Generates topography with noise-masked procedural forest scattering and strict elevation limits.
Inputs (21)
- Boundary (Curve): Closed boundary limits
- MaxHeight (Number): Maximum elevation in meters
- MinHeight (Number): Minimum elevation in meters
- Seed (Integer): Randomization seed
- PatternSizeXY (Number): List of feature sizes in meters
- PatternHeightZ (Number): List of relative feature strengths
- ContourStep (Number): Interval for normal contour lines
- MainStep (Number): Interval for main contour lines
- Colors (Colour): List of gradient colors based on height
- Resolution (Integer): Grid density
- UseSlopeColor (Boolean): Toggle steep slope coloring
- SlopeColor (Colour): Color applied to sheer cliffs/slopes
- SlopeAngle (Number): Angle where slope color starts
- TerrainStyle (Integer): 0 = Realistic Soft Hills, 1 = Ridged/Cellular Pattern
- Solid (Boolean): Toggle closed mesh extrusion
- BaseCol (Colour): Color for the extruded solid base section
- TreeMsk (Number): Coverage mask threshold 0.0 to 1.0
- TreeDns (Number): Density multiplier inside mask areas 0.0 to 1.0
- TreeSeed (Integer): Dedicated seed for the forest noise map
- TreeZMin (Number): Minimum relative elevation for trees 0.0 to 1.0
- TreeZMax (Number): Maximum relative elevation for trees 0.0 to 1.0
Outputs (5)
- Mesh (Mesh): Gradient colored terrain geometry
- NormContours (Curve): Standard contour lines
- MainContours (Curve): Major interval contour lines
- Trees (Point): Scattered point coordinates for trees
- Info (Text): Component information and interpretation
Method, assumptions and simplifications
The same notes appear in the component's Info output.
Method
- The Boundary is flattened and tessellated: a grid of Resolution columns across its width (rows in proportion) inside the boundary, plus points along the boundary at about one grid step, are triangulated with Rhino CreateFromTessellation.
- If MinHeight is greater than MaxHeight the two are swapped and a warning is shown. Each vertex height = MinHeight + t × (MaxHeight − MinHeight), where t is fractal gradient (Perlin-style) noise: one octave per PatternSizeXY / PatternHeightZ pair (defaults when the inputs are empty 500, 150, 30 m and 1, 0.3, 0.05; the auto-wired panels give 150, 50, 20 and 1.0, 0.3, 0.1), octave i seeded with Seed + i and each octave's coordinates rotated about 37°.
- TerrainStyle 0 (soft hills): weighted mean of the octaves mapped to 0 to 1 and clamped. TerrainStyle 1 (ridged): weighted mean of (1 − |n|)².
- Vertex colours follow the Colors gradient by relative height. With UseSlopeColor, vertices whose normal Z is below cos(SlopeAngle) blend towards SlopeColor over 0.2 of normal Z.
- Contours are cut every ContourStep from the mesh; those at multiples of MainStep go to MainContours.
- Trees: on triangles with normal Z ≥ 0.7 and relative height between TreeZMin and TreeZMax, a forest mask noise (150 m scale, TreeSeed) below TreeMsk gives an expected count of (1 − mask / TreeMsk) × TreeDns × 3 trees per triangle at random positions.
- Solid adds a flat base at min height − max(1 m, 10% of the height range) and side walls from the naked edges.
Assumptions
- Units are metres; the noise uses absolute world X and Y, so moving the Boundary changes the terrain.
- The result is synthetic test terrain, not a model of a real site.
Simplifications and limits
- Heights stay inside MinHeight to MaxHeight but rarely reach them: the noise is not stretched to the full range.
- Tree count is per triangle, not per area, so density per hectare changes with Resolution.
- No erosion, drainage or geological process is modelled.
- The sine-based hash loses precision at large (UTM-size) coordinates, so the noise degrades far from the origin.
- With Solid on, the mesh is welded at any angle, so wall and base colours can bleed into the terrain edge.
Workflow
- Closed curve -> Boundary. Mesh -> Raindrop Flow Engine, Hydro-DEM, slope or wind tools to test them on varied topography.
References
- Perlin K. (2002), Improving noise, ACM SIGGRAPH: quintic fade curve used in the noise.