Hygrothermal Comfort
Maps wind-engine velocity samples onto apparent ("feels like") temperature and locates the best/worst comfort points, without requiring a regular grid.
Overview
Maps wind-engine velocity samples onto apparent ("feels like") temperature and locates the best/worst comfort points, without requiring a regular grid.
Inputs (9)
- Run (Boolean): Global execution toggle switch
- TerrainMesh (Mesh): The underlying site topography - its own vertices/connectivity are reused directly for ComfortMesh, no separate grid is built
- VelocityValues (Number): Raw wind speeds (m/s), aligned index-for-index with TagPoints - e.g. from the wind engine's VelocityValues output
- TagPoints (Point): Sample points matching VelocityValues index-for-index - e.g. from the wind engine's TagPoints output
- Humidity (Number): Relative humidity (%), currently a single constant across the whole site
- Temperature (Number): Ambient dry-bulb air temperature (deg C), currently a single constant across the whole site
- IdealTemperature (Number): The apparent temperature (deg C) considered ideal/neutral comfort - deviation from this defines best/worst
- ComfortTolerance (Number): Fraction (0-1) of the observed deviation-from-ideal range within which a point still counts as Best (near the minimum) or Worst (near the maximum)
- CustomColors (Colour): Custom color spectrum override for the comfort mesh
Outputs (10)
- BestComfortPoints (Point): Point(s) with apparent temperature closest to IdealTemperature, within ComfortTolerance of the single best
- BestComfortValues (Number): The apparent temperatures for the BestComfortPoints
- WorstComfortPoints (Point): Point(s) with apparent temperature furthest from IdealTemperature, within ComfortTolerance of the single worst
- WorstComfortValues (Number): The apparent temperatures for the WorstComfortPoints
- ComfortMesh (Mesh): The input terrain mesh, vertex-colored by comfort deviation
- TagPoints (Point): Pass-through of the input tag points
- ComfortValues (Number): Raw apparent temperature (deg C) per terrain vertex
- ComfortColors (Colour): List of colors corresponding to each vertex on the mesh
- Info (Text): Component information and interpretation
- Dashboard Data (Text): Unified JSON payload containing legend and key analysis metrics for the Analysis Dashboard
Method, assumptions and simplifications
The same notes appear in the component's Info output.
Method
- Apparent temperature (Steadman, shade version as used by the Australian Bureau of Meteorology): e = (RH / 100) × 6.105 × exp(17.27 T / (237.7 + T)) hPa, AT = T + 0.33 e − 0.70 v − 4.00 °C, with T = Temperature, RH = Humidity and v = each VelocityValues speed. When VelocityValues and TagPoints counts differ, a warning is shown and nothing is computed.
- Best / Worst: for each TagPoint the deviation |AT − IdealTemperature| is computed; points within ComfortTolerance × (max − min deviation) of the smallest deviation are Best, those within it of the largest are Worst.
- ComfortMesh: each TerrainMesh vertex takes the AT of its exact nearest TagPoint (hash-grid search widened until no closer point is possible, brute force as a fallback).
- Vertex colours are the deviation scaled between the mesh minimum and maximum, on CustomColors or a default green to red ramp.
Assumptions
- Temperature and Humidity are single values for the whole site; only wind varies in space.
- VelocityValues are mean wind speeds in m/s matched index by index to TagPoints.
Simplifications and limits
- No solar or long-wave radiation, clothing or activity: shade AT only, so sunny and shaded spots read the same.
- Steadman's AT uses wind speed at 10 m height; pedestrian-level CFD speeds are lower, so AT reads warmer than the published scale.
- Colours are relative to the run (min to max deviation), not an absolute comfort scale.
- The mesh mapping is nearest-sample, not interpolated, so the colouring shows steps at the sample spacing.
Workflow
- Fast CFD or wind engine TagPoints and VelocityValues -> TagPoints, VelocityValues; terrain -> TerrainMesh.
- ComfortValues -> Analysis Heatmap for UTCI-style bands; Dashboard Data -> Analysis Dashboard.
References
- Steadman R.G. (1994), Norms of apparent temperature in Australia, Australian Meteorological Magazine 43.
- Australian Bureau of Meteorology, Thermal comfort observations: apparent temperature formula.