CWT
Curtain wall transoms: divides each closed planar outline into modules of about modSize and places, at every division point, a rectangular transom profile (tDepth outwards, perpendicular to the outline, by tHeight upwards). Outputs the profiles as surfaces and the outward division lines.
Overview
CWT
Inputs (4)
- curves (Curve): curves
- modSize (Number): modSize
- tDepth (Number): tDepth
- tHeight (Number): tHeight
Outputs (3)
- transoms (Brep): transoms
- divLines (Line): divLines
- Info (Text): Method, assumptions, simplifications and references.
Method, assumptions and simplifications
The same notes appear in the component's Info output.
Method
- Only closed, planar curves are used. Each one is divided into n equal-length parts, n = max(4, ceil(length / modSize)), so the real spacing is length / n (at most modSize).
- At each division point the horizontal direction perpendicular to the curve is found (curve-plane normal × tangent) and turned outwards using the outline orientation (counter-clockwise = interior on the left), so concave L, U and courtyard plans are handled; the area centroid is used only if the orientation cannot be found.
- A divLine runs from the point outwards by tDepth.
- A transom is a flat rectangular surface on that line, rising tHeight along the curve-plane normal (turned to point up).
- modSize, tDepth and tHeight are matched by branch path and item index; a single value applies to all; missing values use defaults 1.0 m, 0.2 m and 0.1 m; curves with a non-positive modSize are skipped with a warning. Outputs keep the input path plus the curve index.
Assumptions
- Curves are closed floor or facade outlines drawn in a horizontal plane; units are metres.
Simplifications and limits
- Transoms are zero-thickness surfaces, not solid profiles.
- No corner handling: fins sit only at equal divisions, not at the curve's corners.
Workflow
- Floor outlines (for example Facade JSON Parser BoundsClosed) -> curves; transoms -> Custom Preview or bake.